Bosch Dishwasher Repair Near Me: Fix Error Codes E24, E25, E09, E15 & More
Sultan Appliance Repair • May 15, 2025
Bosch Dishwasher Repair Near Me: Common Problems, Error Codes, and Fixes
Is your Bosch dishwasher not draining, not cleaning dishes, or showing error codes like E24, E25, E09, or E15? You’re not alone. Bosch dishwashers are known for their quality, but like all appliances, they can run into problems over time.
In this guide, we’ll walk through:
Common Bosch dishwasher issues
What each error code means
Solutions you can try before calling a pro
Frequently asked questions (FAQ)
Common Bosch Dishwasher Problems & Solutions
1.
Bosch Dishwasher Not Draining
If your dishwasher isn’t draining water after a cycle, the problem is usually:
Clogged Drain Pump: Food, glass, or labels can jam the impeller.
Blocked Drain Hose: Kinks or debris in the hose can block flow.
Clogged Sink or Garbage Disposal: Backpressure can prevent proper drainage.
Faulty Check Valve: Water might be flowing back into the tub.
Tip: Always check the filter and sump area under the lower spray arm first.
2.
Bosch Dishwasher Not Cleaning Dishes
If your dishes come out dirty:
Clogged Spray Arms: Debris blocks water flow. Remove and rinse them.
Dirty or Clogged Filter: Located at the bottom—clean it regularly.
Worn Circulation Pump: If it sounds weak, the pump may need replacing.
Low Water Pressure: Ensure the inlet valve is working and supply is sufficient.
3.
Bosch Dishwasher Not Drying Dishes
If your dishes are still wet after a cycle:
Faulty Heat Pump: It both heats and circulates water—can trigger E09.
Thermal Sensor Failure: May prevent the drying cycle from starting.
Rinse Aid Empty: Use rinse aid for optimal drying.
Malfunctioning Control Board: Could fail to activate drying functions.
Bosch Dishwasher Error Codes Explained
E24 – Drain Pump Blocked
This code means the water can’t drain.
Likely Cause: Clogged filter, pump impeller jammed, or blocked hose.
Fix: Clean out the filter and check for debris in the pump or hose.
E25 – Pump or Check Valve Issue
Similar to E24, but usually points to:
Blocked or broken drain pump cover.
Obstruction inside the drain pump housing.
Faulty non-return valve.
E09 – Heating Element Fault
Indicates the heat pump isn’t working correctly.
Likely Cause: Failed heat pump or burned-out sensor.
Fix: Replacement of the heat pump module is often required.
E15 – Leak Detected (Flood Switch Activated)
This code triggers when water collects in the base tray.
Causes:
Leaking water inlet valve
Cracked diverter motor
Faulty circulation pump seal
Fix: Remove the unit, tip it forward to drain, inspect for leaks, and replace faulty parts.
Bosch Dishwasher Not Filling Water
If no water enters the machine:
Check water supply valve under the sink.
Inspect inlet valve and water inlet hose for clogs or malfunction.
Float switch may be stuck in the up position, falsely signaling a full tub.
SEO Keywords to Rank For:
Bosch dishwasher repair near me
Bosch dishwasher not draining
Bosch dishwasher not cleaning
Bosch dishwasher error E24, E25, E09, E15
Bosch dishwasher heat pump replacement
Bosch dishwasher leaking water
Bosch appliance repair Westchester County / Fairfield County
Frequently Asked Questions (FAQ)
Q: Why is my Bosch dishwasher not draining?
A: Common causes include clogged filters, blocked hoses, or a jammed drain pump. Always check the filter and sump before calling for service.
Q: What does E24 mean on my Bosch dishwasher?
A: E24 means the unit can’t drain. Clean the pump, check the drain hose, and inspect the filter area.
Q: Can I fix E15 on my Bosch dishwasher myself?
A: Sometimes. If it’s a minor leak, draining the base and cleaning around seals may help. For recurring leaks, a technician should inspect the diverter or circulation pump.
Q: My Bosch dishwasher isn’t heating. What should I check?
A: E09 usually means the heat pump or sensor has failed. This often requires replacement by a technician.
Q: Who offers Bosch dishwasher repair near me?
A: Sultan Appliance Repair specializes in Bosch appliance repair in Westchester County, NY and surrounding areas. We offer same-day service and stand behind our work.
Need Bosch Dishwasher Repair?
If you’re seeing these error codes or just tired of dishes coming out dirty or wet, schedule a Bosch dishwasher repair appointment today with Sultan Appliance Repair. We serve Westchester County, Fairfield County, and surrounding areas.
Call Now: (914-362-5133)
Or Book Online
You might also like
Need local appliance repair in Westchester, Yonkers, or Stamford? We service Bosch dishwashers, LG washers, and more. Fast, certified repairs near you.
Troubleshooting Whirlpool dishwasher error codes? Learn what they mean, common fixes, and whether your dishwasher is worth repairing in Westchester County.
Dishwasher Not Draining Possible causes: clogged drain hose, blocked filter, bad drain pump Symptoms: water pooling at the bottom, foul smell Solution: clean the filter, inspect the hose, or replace pump 2. Not Cleaning Dishes Properly Causes: broken spray arm, hard water buildup, or failing wash motor Fix: spray arm cleaning/replacement, descaling treatment, or new motor 3. Dishwasher Leaking Causes: worn door gasket, cracked tub, or faulty inlet valve Fix: Replace gasket, tighten or replace inlet valve 4. Not Starting or Stopping Mid-Cycle Causes: defective door latch, control board issues, float switch stuck Fix: Reset machine, inspect door latch and float, or service control board 5. Dishwasher Making Loud Noises Causes: faulty motor, debris in pump, or worn bearing Fix: motor or pump replacement Whirlpool Dishwasher Error Codes Explained Error Code Meaning Possible Fix F1E1 Control board failure Replace control board F6E1 Water not entering Check inlet valve and water supply F6E4 Float switch stuck or water detected Check float, drain pump F8E4 Leak detected by bottom sensor Inspect for leaks and reset F9E1 Drain system problem Clean filter, drain hose, or replace drain pump Most of these codes can be fixed affordably, especially if you catch them early. Is It Worth Fixing Your Whirlpool Dishwasher? Yes, if: Your dishwasher is less than 8–10 years old The repair cost is under $300 The issue is with replaceable parts (e.g., pump, gasket, latch) No, if: It’s over 10 years old The control board and motor both need replacing You’ve had multiple repairs recently Our Recommendation: Call a local certified Whirlpool technician like Sultan Appliance Repair before you replace the unit. A simple fix may save you hundreds of dollars. Serving All of Westchester County, NY We provide Whirlpool dishwasher repairs in: Yonkers New Rochelle White Plains Mount Vernon Peekskill Scarsdale & more Need Help? We’ll Fix It Fast. If you’re seeing Whirlpool dishwasher error codes or your unit isn’t performing, call us at 914-362-5133 or book online here. We offer same-day service, fair pricing, and a 1-year parts & labor warranty.